Get wired!  

pinout (распиновка)

Ethernet 1000Base-T (Gigabit ethernet)

This page not supported any more. Please visit this page

1000 Base-T uses all pairs for bidirectional traffic in the RJ45 connector. Cables used should be of Category 5e(nhanced), even though Category 5 cables usually works too.


8 pin RJ45 FEMALE connector  at the network interface cards/hubs
Pin Name Description
1 BI_DA+ Bi-directional pair A +
2 BI_DA- Bi-directional pair A -
3 BI_DB+ Bi-directional pair B +
4 BI_DC+ Bi-directional pair C +
5 BI_DC- Bi-directional pair C -
6 BI_DB- Bi-directional pair B -
7 BI_DD+ Bi-directional pair D +
8 BI_DD- Bi-directional pair D -

8 pin RJ45 MALE connector  at the cables

Источник: IEEE Std 802.3, 2000 Edition

Реклама: