Get wired!  

pinout (распиновка)

ATA (44) Internal connector

This page not supported any more. Please visit this page

This connector is mostly used for 2.5" internal harddisks. See ATA for pin 1-40.


44 pin IDC (0.75") MALE connector  at the controller & peripherals
Pin Name Dir Description
41 +5VL --> +5 VDC (Logic)
42 +5VM --> +5 VDC (Motor)
43 GND --- Ground
44 /TYPE --> Type (0=ATA)

44 pin IDC (0.75") FEMALE connector  at the cable

Note: Direction is Controller relative Devices (harddisks).

Реклама: