Кабели для COM портов

• 9 to 25 Serial Adapter This adapter will enable you to connect a 25 pin serialcable to a 9 pin connector at the computer
• APC Back-UPS Cable (PN 940-0020B) pinout 
• APC Smart-UPS Cable (PN 940-0024B) pinout 
• Adtran CSUs RJ45 to DB9 Cable 
• Cable for wiring Digital cameras (AGFA, Olympus) with PC (COM) 
• Cisco RJ45 to DB25 Adapter 
• Conrad Electronics MM3610D (25) Cable Use this cable to connect a Conrad Electronics Multimeter 3610D to a PC serial port.
• Conrad Electronics MM3610D (9) Cable Use this cable to connect a Conrad Electronics Multimeter 3610D to a PC serial port
• Console cable for NetServer8/16 
• Intel 100FX switch console cable 
• KODAK CAMERA SERIAL CABLE This is the layout of the Kodak digital camera interface cable to a pc serial port, (used by KODAK DC40, DC50, DC120, DC240, DC280, DC3400, DC5000, RCA CDS4100, VIVITAR 3500, ROLLEI Model D7COM) to download the stored images from camera to pc.
• LapLink 25 pin Serial Cable Will work with LapLink from Travelling Software
• LapLink 9 pin Serial Cable Will work with LapLink from Travelling Software
• Linker DTE 25 pin Serial Cable 
• Macintosh to HP48 Cable 
• Magellan 315 GPS - PC 9 pin serial The Magellan 315 has a NMEA output, which can also use the RS232 voltages. The PC cable is a straight through, wired:
• Nullmodem (25-25) Cable Use this cable between two DTE devices (for instance two computers)
• Nullmodem (9-25) Cable Use this cable between two DTE devices (for instance two computers)
• Nullmodem (9-9) Cable Use this cable between two DTE devices (for instance two computers)
• Nullmodem Adapter This adapter will enable you to use a normal serialcable as a nullmodem
• PS/2 to Serial Mouse Adapter This adapter will enable you to use a mouse with a 6 pin Mini-DIN (PS/2) connector to a computer with a 9 pin D-SUB (Serial) connector. This requires that the mouse handles both protocols. A mouse like this is sometimes referred to as a combo-mouse.
• RAD console cable (25 pin)  Console cable for configuring RAD's devices (e.g. FPS-8). This is cable supplied with RAD FPS-8 switch. The pinout of the cable in manual is wrong. Provided here is a real pinout.
• RAD console cable (9 pin)  Console cable for configuring RAD's devices (e.g. FPS-8). This is non-standard cable, because RAD FPS-8 switch is supplied with DB-25 - RJ-45 cable. Most of modern computers have no 25 pin COM-ports.
• RJ45 Roll-Over Cable 
• Serial to PS/2 Mouse Adapter This adapter will enable you to use a mouse with a 9 pin D-SUB (Serial) connector to a computer with a 6 pin Mini-DIN (PS/2) connector. This requires that the mouse handles both protocols. A mouse like this is sometimes referred to as a combo-mouse.
• V.35 crossover cable cable for wiring DCE with DCE or DTE with DTE devices
• White Console to PA-RISC computers cable 

• Mac to C64 Nullmodem Cable The RS-232 on the C64 is a little bit strange. It uses inverted TTL level of signals. The RS-422 ports on the Macintosh has both an inverted and non-inverted input By using the inverted instead of non-inverted the inverted C64 level is back to normal
• Mac to HP48 Cable 

• Cisco Asynchronous-Line RJ45 to 68Pin SCSI Cable 
• Cisco Console (25) Cable Use this cable to configure a Cisco router thru the Console port at the router.
• Cisco Console (9) Cable Use this cable to configure a Cisco router thru the Console port at the router.
• Cisco EIA/TIA-232 (RS-232) DCE Cable 
• Cisco EIA/TIA-232 (RS-232) DTE Cable 
• Cisco EIA/TIA-449 (RS-449) DCE (DB60 to DB37) 
• Cisco EIA/TIA-449 (RS-449) DTE (DB-60 to DB-37) 
• Cisco EIA/TIA-530 DTE Cable (DB60 to DB25) 
• Cisco V.35 DCE Cable (DB-60 to 34-Pin 
• Cisco V.35 DTE Cable (DB60 to 34-Pin) 
• Cisco X.21 DCE Cable (DB-60 to DB-15) 
• Cisco X.21 DTE Cable (DB-60 to DB-15)